Gen-4-Pkgs-REV-A

Quick Specs

Current Rating50  to 600 amps
Operating Voltage4.8 to 36 VDC
Voltage Drop at Max Current10 to 40 mV
Temperature Range-40 to +105 C
Weight14.7 ounces
Small Package6.33” x 4.31″ x 1.80″
Medium Package7.78″ x 5.13″ x 1.95″
Large Package8.58″ x 6.63″ x 1.89″
  • Comprised of 2 bi-directional SSR’s
  • Low voltage , high current capability
  • Industry-leading, ultra-low on-state resistance
  • Up to 4 levels of under-voltage shutdown (optional)
  • Up to 4 levels of over-voltage shutdown (optional)
  • Up to 2 levels of circuit break shutdown with 3 options for reset (optional)
  • Timers to delay on or off (optional)
  • Differentiation between in-rush and shorted conditions
  • Over-current protection
  • Sleep mode for ultra-low current draw (optional)
  • Fault LED blinking patterns for identifying cause of relay open
  • 99.9% efficient at maximum continuous current
  • No heat sinks or airflow required
  • No de-rating required over full temperature range
  • Fully encapsulated solid state design
  • Internationally patented MOSFET technology
  • Recommended by top battery manufacturers

POWER-GATE Single Pole Double Throw (SPDT) are comprised of two bi-directional solid state relays that communicate with each other via the supplied harness.

Each device may be programmed to create the requested functionality specific to the application; basic operation is as follows:

1) When the switch trigger is not active, the master relay will be closed (assuming its main trigger is active and there are no over-current or short-circuit conditions present) and the slave relay will be open (regardless of the state of its main trigger).

2) When the switch trigger is active, the master relay will be open (regardless of the state of its main trigger) and the slave relay will be closed (assuming its main trigger is active and there are no over-current or short-circuit conditions present).

3) When the master relay is triggered on, the slave relay can be forced on as well by activating its override trigger.

This setup is highly customizable so please contact us so we may assist in configuring devices for your application.

POWER-GATE programmable OR’ing diodes provide high performance and reliable switching

SPDT modules are constructed based on our internationally patented large MOSFET array technology and are comprised of two bi-directional solid state relays programmed to respond per the customer’s needs. See bi-directional relays here.

Is POWER-GATE suitable for your application? Contact us and let our talented applications engineers help determine what configuration is best for your application.

Need help configuring a device? Click Here

For OEM applications, military and fleet sales, special applications, or general questions call us 858.720.1339.